The Vapers Den Electronic E-Cigarette Vaping Forum

The Vapers Den => Atomiser Discussions => Topic started by: CYBORG on October 04, 2018, 03:22:29 PM

Title: Krma BF or Drip RDA
Post by: CYBORG on October 04, 2018, 03:22:29 PM
Almost forgot to post this but I got myself a Krma BF RDA (clone) and its great, even I canít over squonk it.


Title: Re: Krma BF or Drip RDA
Post by: Darth Vaper on October 04, 2018, 05:55:56 PM
Thanks for sharing Cy.... I still need a squonk atty for the VTinbox.

I like the looks of the airflow and well on this one..... is the flavor on par with a kayfun?

And most importantly...... do you have a link?
Title: Re: Krma BF or Drip RDA
Post by: CYBORG on October 04, 2018, 06:27:18 PM

You seriously want to compare it with a Kayfun Darth  ::)
Honestly though the flavour is good, no complaints on that front.
Take a look on Fast Tech for SXK Krma styled RDA.
Title: Re: Krma BF or Drip RDA
Post by: Darth Vaper on October 04, 2018, 11:11:53 PM
Okay Cy... will give it a try.

I really would like to use this squonker
Title: Re: Krma BF or Drip RDA
Post by: greendog on October 05, 2018, 02:37:38 AM
If you are after a decent single coil squonk rda then take a look at the shogun by vapourz cloud. I picked one up the other day and its a good un. 2 top caps, one with small airflow and one with a bit more air flow. Both are quite restrictive and flavour is good. 40 quid tho.
Title: Re: Krma BF or Drip RDA
Post by: Darth Vaper on October 06, 2018, 08:59:58 PM
It seems pretty similar to the one Cy is talking about. Think I'm gonna try the one he pointed out first and go from there.
Title: Re: Krma BF or Drip RDA
Post by: JFord on October 30, 2018, 02:58:06 PM
Krma looks pretty interesting and sounds like it's from a solid brand. Anyone tried this MTL with a 0.7ohm build or higher?
Title: Re: Krma BF or Drip RDA
Post by: CYBORG on October 30, 2018, 03:22:13 PM
 Got a 1Ω build in it at the moment and its OK at that.
Title: Re: Krma BF or Drip RDA
Post by: Darth Vaper on October 30, 2018, 07:14:12 PM
I put it on order and just waiting for it to ship... look forward to giving it a go. Picked up an extra Prime and two mods too. Actually found two that fit my preference... Not quite Stainless Steel... not quite Carbon Fiber but close enough

Vaporesso Swag 80W....
(https://img.fasttechcdn.com/873/8733900/8733900-13.jpg)

and the ATHENA Smart-40S 40W...
(https://img.fasttechcdn.com/335/3354600/3354600-4.jpg)
Title: Re: Krma BF or Drip RDA
Post by: caz on October 31, 2018, 08:00:58 AM
wow,   anyone seen the real darth,   not like you to buy stuff   >:D
Title: Re: Krma BF or Drip RDA
Post by: Ian on October 31, 2018, 03:46:52 PM
Darth, have you looked at the Double Barrel mod. It's solid as fuck and im sure it could be stripped back to a stainless finish. I bet you could run a truck over it and it would survive. It's quite weighty.
Title: Re: Krma BF or Drip RDA
Post by: Darth Vaper on October 31, 2018, 05:49:27 PM
I really can't stand the cast metal devices anymore. Had enough.

The mods were cheap enough. What I'm using now just looks like crap, It's useless to try and shine it, just gets dull after a couple of hours. They will buy me some time until the winter so I can produce a couple of my own. I did pick up a sheet of Carbon Fiber... damn that stuff is expensive.

Haven't seen the Double Barrel mod Ian.... got a feeling its a joined twin tube design though...  Link please?

A weighty solid chunk of Stainless and Carbon Fiber is what I want to build.
Title: Re: Krma BF or Drip RDA
Post by: Ian on October 31, 2018, 06:03:07 PM
http://squidvape.com/index.php?route=product/product&product_id=1707
Title: Re: Krma BF or Drip RDA
Post by: Ian on October 31, 2018, 06:06:52 PM
Not sure what metal they use but it's thick and heavy. Not at home at the moment but when I get home I'll pop it on the scales
Title: Re: Krma BF or Drip RDA
Post by: Darth Vaper on October 31, 2018, 06:10:01 PM
Not fond of the looks of that one.

This one looks nice .... http://squidvape.com/index.php?route=product/product&path=18&product_id=2093

Neither of them say they are made out of Stainless though. The bit of dull luster makes me think it may be cast or billet aluminum.
Title: Re: Krma BF or Drip RDA
Post by: Ian on October 31, 2018, 06:13:02 PM
That's basically the same but uses 21700 batteries. Bigger and heavier.
Title: Re: Krma BF or Drip RDA
Post by: Darth Vaper on October 31, 2018, 06:14:40 PM
Mine will probably be 1 26650.