The Vapers Den

Author Topic: New coil build = Fail  (Read 1161 times)

Offline al666

  • Vapeologist
  • ******
  • Posts: 2461
  • Gender: Male
  • Mr. 306, but call me Al, just Al
New coil build = Fail
« on: April 19, 2014, 02:10:42 PM »
Been trying to build a 0.4 ohm 2mm diameter single microcoil on an Igo-L using 0.32mm kanthal ... Remarkably difficult to build a usable coil with only 22mm of wire including the legs to the posts :}}}

*looks for thicker kanthal*


Offline al666

  • Vapeologist
  • ******
  • Posts: 2461
  • Gender: Male
  • Mr. 306, but call me Al, just Al
Re: New coil build = Fail
« Reply #1 on: April 19, 2014, 03:00:02 PM »
Ooh, Dan. Fancy moving this to where sensible people will see it and mock me :D

Anyhoo ... 3/4 turns twisted 0.32mm on a 0.15mm diameter ---> Bingo! 0.37 ohms  :)+1

Rip Trippers? Who he? ;)

Blimey, take your finger of the button and the bugger keeps going for a few seconds. Me and my bright ideas  ::)


 


* Theme Select



Forum Default

Permanently