Author Topic: eJuice Me Up - eJuice Calculator for the PC (Read 39680 times)

breaktru · « **Reply #50 on:** December 16, 2015, 02:32:24 PM »

ha, ha. no problem, glad you sorted it out.

retrieverman · « **Reply #51 on:** January 02, 2016, 07:13:18 AM »

I made 200ml of vanilla custard and it still smells chemically after a month any ideas where I went wrong

caz · « **Reply #52 on:** January 02, 2016, 09:23:52 AM »

Have you tested it? does it taste chemically?

retrieverman · « **Reply #53 on:** January 02, 2016, 04:13:04 PM »

Yes bloody horrible lol

caz · « **Reply #54 on:** January 02, 2016, 04:26:00 PM »

oh dear, this is why i said only make small batches

Not sure what has gone wrong, you would have to put up exactly what you did, the calculations etc and see if anyone can work out what happened.

i know custard needs to steep for ages, but i dont think it should taste horrible while being steeped, i'm no custard connoisseur though so what do i know

retrieverman · « **Reply #55 on:** May 11, 2016, 10:26:42 AM »

Just went to go on the ejuice me up
And all I get is this what's going on

caz · « **Reply #56 on:** May 11, 2016, 11:06:02 AM »

strange, i just clicked on the links to the website in ejuicemeup's profile and our links directory and not getting that page pop up.

breaktru · « **Reply #57 on:** May 11, 2016, 01:47:22 PM »

I can assure you that the ejuice me up web page is SAFE.
You are using Microsoft Smartscreen filtering which is showing a FALSE positive.

I notified Microsoft of the FALSE positive when using Microsoft Edge and Smartscreen enabled.

danwldr · « **Reply #58 on:** May 11, 2016, 02:11:14 PM »

Maybe a Win10 issue

Does the same for me, it was the one in Breaktru's sig so assume its real

I just disregarded and carried on

danwldr · « **Reply #59 on:** May 11, 2016, 02:17:18 PM »

Of course Win10 still uses smart screen filter even when you turn it off

Use these instructions and you can download the file

http://www.top-password.com/blog/how-to-turn-off-smartscreen-filter-in-windows-10-or-8/

breaktru · « **Reply #60 on:** May 11, 2016, 02:24:16 PM »

I use firefox with Windows 10 so I was unaware of the block using Edge. Thanks retrieverman for bringing it to my attention.

retrieverman · « **Reply #61 on:** May 11, 2016, 04:30:14 PM »

I normally use my iPad with no problems just happened to have my laptop turned on so tried to
Use it and that was all I got smart filter now turned off cheers Dan

retrieverman · « **Reply #62 on:** May 11, 2016, 05:24:54 PM »

Still would not let me download to my laptop so download on my old windows 7 laptop then transferred to memory stick then put it on my windows 10 works fine now lol

Ian · « **Reply #63 on:** May 11, 2016, 07:25:08 PM »

I love this calculator. In the next update, would it be possible to be able to save numerous flavor gram weights??. That would be awesome.

vapingfool · « **Reply #64 on:** May 11, 2016, 11:17:10 PM »

Why bother? You may be the only person in existence that uses gram weights for juice mixing.

danwldr · « **Reply #65 on:** May 12, 2016, 11:36:43 AM »

Quote from: Ian on May 11, 2016, 07:25:08 PM

I love this calculator. In the next update, would it be possible to be able to save numerous flavor gram weights??. That would be awesome.

Does 10ml of VG weigh more than 10ml of PG?

Serious question, just miffed a bit

vapingfool · « **Reply #66 on:** May 12, 2016, 12:59:33 PM »

Yes, roughly 20% more. VG has density 1.26 gm/cm³, PG has a density of 1.04 gm/cm³.

danwldr · « **Reply #67 on:** May 12, 2016, 01:56:39 PM »

Think I will stick to ml's

Ian · « **Reply #68 on:** May 12, 2016, 08:32:26 PM »

Quote from: vapingfool on May 11, 2016, 11:17:10 PM

Why bother? You may be the only person in existence that uses gram weights for juice mixing.

It's actually pretty common. Obvisiosly the volume method is fine, especially if you are mixing a juice with just one or two flavours but if you are using a recipe with 5-8 flavours, weighing is easier with no clean up after.

vapingfool · « **Reply #69 on:** May 13, 2016, 12:07:34 AM »

Pretty common where? In standard chemistry, liquids are measured by volume and solids are measured by weight. This is true even when making up standard solutions (probably the most precise measuring commonly done). Most of the solvent is added to the volumetric flask, the solute is added and dissolved, then more solvent is added to bring the total volume up to the calibration line.

With a graduated cylinder, there is little more clean-up than using your method, and a simple water wash/rinse is sufficient. The needle dripper bottles of flavoring makes volumetric measuring easy.

All the juice formulas I have see give percentages by volume. Unless you know the specific gravities of each flavoring solution, your "by weight" method is not accurate.

Like Dan, I will stick with ml's to the nearest 1/10 ml. If I wanted to be really anal about it, I have the equipment to measure in micro-liters - but it is not worth the effort. Even if only mixing 10 ml of juice, 0.1 ml is 1% of the total volume - and I can interpolate to half that or 0.5%.

Ian · « **Reply #70 on:** May 13, 2016, 01:56:12 AM »

It's cool man, I have the gravity weights for the flavours I use. I never said my way was the only way or the best way. I simply said it was easier, quicker and less cleaning up for me. If anyone wants to look into it, google it. Tons of info and lots of threads on various vaping forums. I meant it was quite common amongst diyers. Maybe not any on this forum but others yes.

breaktru · « **Reply #71 on:** May 13, 2016, 05:34:45 AM »

That's a touchy subject among DIYers. Seen a lot of fighting between gram-ers and the ml-ers.
I personally use syringes and can mix up a recipe and clean up in very little time. I have also mixed by weight but prefer by volume.

caz · « **Reply #72 on:** May 13, 2016, 05:54:09 AM »

each to their own i say, although i would like to add i hate mixing

Hi dave, good to see ya

Ian · « **Reply #73 on:** May 13, 2016, 08:51:05 AM »

Didn't realize it was a touchy subject. I did start out using volume and then read up and decided to try by weight. Works for me but whatever works for everyone else is cool with me.

vapingfool · « **Reply #74 on:** May 13, 2016, 11:01:06 AM »

As long as you do the calculations to weight correctly, either method is fine.

In reality, the only somewhat critical measurement is for the nicotine base, and even that does not have to be very precise.

News:

Author Topic: eJuice Me Up - eJuice Calculator for the PC (Read 39680 times)

Theme Select