Author Topic: eJuice Me Up - eJuice Calculator for the PC (Read 40948 times)

breaktru · « **Reply #25 on:** April 11, 2014, 07:37:26 AM »

Adjust your target PG/VG ratio so that the PG that you add comes out to 0% PG

If you want, post a screen shot of what you are using and I can suggest to you your Target ratio

Torbjørn · « **Reply #26 on:** April 11, 2014, 07:45:07 AM »

With a 20/80 mix the calculator want me to add 0.1ml pg.. so i guess i'm good to go

Thanx for helping me out

Lettie22 · « **Reply #27 on:** April 11, 2014, 07:47:24 AM »

Quote from: Torbjørn on April 11, 2014, 07:45:07 AM

With a 20/80 mix the calculator want me to add 0.1ml pg.. so i guess i'm good to go

Thanx for helping me out

Yeah, you can always just add that .1ml of vg to make it the highest possible VG for that recipe.

breaktru · « **Reply #28 on:** August 07, 2014, 07:04:03 PM »

eJuice Me Up version 14.2 has been released for downloading.

Additional recipes have been added.

slots · « **Reply #29 on:** January 15, 2015, 03:28:06 AM »

Quote from: breaktru on August 07, 2014, 07:04:03 PM

eJuice Me Up version 14.2 has been released for downloading.
Additional recipes have been added.

I love this calculator, and have been using it for over 2 years.
There is one thing about it I wish you could/would adjust, and that's the "drops per ml"
You can only enter one option, and PG/VG/and flavorings all have a different count.
As it is now, I print it out with the drop count of my nic.
Then after printing it out, I go back and put the count in for the PG, calculate it, then again for the VG, then again for the flavoring.
I make the correction for each on the printed sheet.
It would really be nice to be able to have a section where you could enter the "drops per ml" for each, so when printed, I didn't have to go back and change them.
I have no idea if this is possible, but thought I would ask.
Like I said, I love this calculator and I will continue to use it, even though I have to make the adjustments.
Thanks

breaktru · « **Reply #30 on:** January 15, 2015, 05:54:54 AM »

Thanks slots. Glad you like the calc.
After I finish the 10 flavor version, I'll look into the drops.

slots · « **Reply #31 on:** January 16, 2015, 12:30:06 AM »

Quote from: breaktru on January 15, 2015, 05:54:54 AM

Thanks slots. Glad you like the calc.
After I finish the 10 flavor version, I'll look into the drops.

Wow, that was a fast reply.
I wasn't sure the thread was still active.
Thank you for adding it to the "too do" list for consideration.
Looking forward to what you come up with next

Slots

breaktru · « **Reply #32 on:** January 16, 2015, 05:54:32 AM »

The 10 flavor version is complete. I just need to test it out awhile longer

breaktru · « **Reply #33 on:** January 22, 2015, 07:58:53 AM »

eJuice Me Up version 14.6 now has 10 flavoring lines

breaktru · « **Reply #34 on:** March 05, 2015, 08:12:01 AM »

eJuice Me Up version 15.0 has been released for downloading
Added grams weight measuring. Go to the menu "Tools", "Grams Set" and enter your weights.

vapingfool · « **Reply #35 on:** March 05, 2015, 09:22:32 AM »

Looks good.

I have a few suggestions:

Move the Target Nicotine Strength and Amount to Make lines down with the Target PG/VG line. All the other values in that top block are input amounts. This gets the three "output" parameter lines grouped together.

In the Resulting Recipe, if there is no flavor listed on a recipe line - display blanks instead of zeros. By the same token, if Water/Vodka/PGA is not used, don't list it at all in the Resulting Recipe.

breaktru · « **Reply #36 on:** March 21, 2015, 07:43:14 AM »

Fixed decimal recognition of comma where PC regional settings use a comma rather than a dot for decimal separator. See version 15.4

breaktru · « **Reply #37 on:** July 07, 2015, 06:42:27 PM »

Latest version is 15.5.4

venom ballistics · « **Reply #38 on:** August 03, 2015, 12:43:23 PM »

I'd like to give a shout out to you for the best damned mix software in print.

breaktru · « **Reply #39 on:** August 03, 2015, 04:03:09 PM »

Quote from: venom ballistics on August 03, 2015, 12:43:23 PM

I'd like to give a shout out to you for the best damned mix software in print.

Thank you venom. I really appreciate the compliment.

vapingfool · « **Reply #40 on:** August 10, 2015, 12:57:20 AM »

It is certainly the most versatile spreadsheet. Very nice.

Make the changes I suggested and it would be even better.

A few additional suggestions:

When labeling the concentrations of the source solutions, change the labels to "mg/ml".

Make the spreadsheet dynamic - rather than having to press the Calculate button.

You might consider adding the ability to use two different nicotine base concentrations. For example, I have some in both 30 mg/ml and 100 mg/ml.

---

By the way, it is possible to use the calculator to boost the nicotine concentration of a premixed juice - if you are willing to put up with a bit of flavor reduction - or can order it with extra flavor shots. This would be desirable if the vendor does not sell the higher nicotine concentration you desire. Just use the premixed juice as the "flavor". But you will need some nicotine base in the PG/VG ratio that you desire.

retrieverman · « **Reply #41 on:** November 24, 2015, 02:19:52 PM »

Its the best one out there by miles I just used it to make blueberry maple pancake fingers crossed
I got the ingredients right

haybill2 · « **Reply #42 on:** November 24, 2015, 09:59:06 PM »

Got told about this a while ago, seeing this post just reminded me- going to download it and get going.

vapingfool · « **Reply #43 on:** November 27, 2015, 10:30:01 PM »

Quote from: retrieverman on November 24, 2015, 02:19:52 PM

Its the best one out there by miles I just used it to make blueberry maple pancake fingers crossed
I got the ingredients right

I wouldn't mix anywhere close to that 200 ml at a first attempt. If I were fairly confident that only minor tweaking would be necessary, I might mix 20 ml. For a first attempt at a new mixture, I would mix 2 ml.

Since that is a "cake" mixture, it may require a month or more of steeping.

retrieverman · « **Reply #44 on:** November 28, 2015, 05:27:12 PM »

So would I need to adjust the amount of flavouring ie if making 10ml of juice & that tasted fine
Then wanted to make 200ml would I use the same amount of flavour or need to up the flavouring
Amount

vapingfool · « **Reply #45 on:** November 30, 2015, 09:14:33 PM »

Determine the amount of the flavoring needed for your desired 10 ml experiment.

Then, when wanting to make a new batch, divide the new volume in ml by 10 ml to get the new flavoring amount.

For example, to make that 200 ml of solution, you would want 200/10 = 20 times as much of the flavoring.

So if you used 1 ml of flavoring in your developed experimental 10 ml batch, you would use 20 ml for the 200 ml batch.

But I wouldn't suggest making 200 ml of the juice as your second batch. I would make maybe 50 ml. If that also turned out fine, then you could probably mix a large batch.

Keep in mind that you might get tired of a mixture before you used up a large batch. It is not that hard to mix in smaller batches - I mix ones I know I will be using frequently in 30 ml batches.

retrieverman · « **Reply #46 on:** December 02, 2015, 01:38:49 PM »

I normally only vape vanilla custard and am trying to do larger mixes ie 200ml in 4 x 50ml bottles

FahKingNut · « **Reply #47 on:** December 16, 2015, 01:56:37 AM »

I'm a newb, so don't kill me. I'm just running some numbers to do test batches in theory. The batch I'm running is 30pg/70vg, but I'm getting 4.46ml pg and only 3.74ml vg. Shouldn't the numbers at least be skewed in the other direction even if they don't seem right?

breaktru · « **Reply #48 on:** December 16, 2015, 05:40:19 AM »

What is your Nic PG/VG ratio? How much flavoring are you adding.
A screenshot would help.

FahKingNut · « **Reply #49 on:** December 16, 2015, 02:05:28 PM »

I'm a moron. I'm not entering all of the values. I'm just not understanding how to use it correctly. Sorry.

News:

Author Topic: eJuice Me Up - eJuice Calculator for the PC (Read 40948 times)

Theme Select