The Vapers Den

Author Topic: 2bacco Red vape juice. How can I clone it for DIY?  (Read 64 times)

Offline MaineVaper

  • Full Member
  • ***
  • Posts: 104
  • Gender: Male
  • I smell like vape. You do too.
2bacco Red vape juice. How can I clone it for DIY?
« on: April 01, 2021, 01:06:02 AM »
I bought some 2bacco Red vape juice at a B&M store yesterday and the flavor is awesome but it's pricey. Is there any way that I can clone it for making DIY liquid?

Full disclosure: I normally mix my own juice but I bought what I thought was my usual 48 mg bottle of nic and it turned out to be 250 mg and I mixed it, not noticing. So now I have to dilute it. I'll have plenty of vape juice! 5 liters when I'm done, yikes! Anyway that's why I bought the 2bacco Red...
Former cigar and pipe smoker. Using Kayfun Prime clone with Eleaf iStick Pico 100W mod. Usually at about 10-12 watts.

Offline Darth Vaper

  • Administrator
  • Chief Waffler
  • *****
  • Posts: 7367
  • Gender: Male
Re: 2bacco Red vape juice. How can I clone it for DIY?
« Reply #1 on: April 01, 2021, 10:54:58 PM »
Not familiar with it.. what does it taste like?.. characteristics?

Fresh pack of smokes essence?

Ashtray essence?

Offline MaineVaper

  • Full Member
  • ***
  • Posts: 104
  • Gender: Male
  • I smell like vape. You do too.
Re: 2bacco Red vape juice. How can I clone it for DIY?
« Reply #2 on: April 02, 2021, 10:54:59 PM »
Tastes like very sweet tasty pipe tobacco with something else too. A lot of flavor and very mellow. Made by artofeliquids.com
Former cigar and pipe smoker. Using Kayfun Prime clone with Eleaf iStick Pico 100W mod. Usually at about 10-12 watts.

Offline Darth Vaper

  • Administrator
  • Chief Waffler
  • *****
  • Posts: 7367
  • Gender: Male
Re: 2bacco Red vape juice. How can I clone it for DIY?
« Reply #3 on: April 04, 2021, 09:27:33 PM »
https://wizardlabs.us/flavor-lab#/flavor-group-tobacco-f9-v64

I would start there if you are looking for pipe vapes. I have used the Captain Black flavor.. which is accurate... they offer others like Cavendish and vanilla for pipe.

They should start having flavors back in stock soon

Offline MaineVaper

  • Full Member
  • ***
  • Posts: 104
  • Gender: Male
  • I smell like vape. You do too.
Re: 2bacco Red vape juice. How can I clone it for DIY?
« Reply #4 on: April 07, 2021, 04:44:40 PM »
I'm not sure it's meant as a pipe flavor but it certainly doesn't taste like cigarettes. After vaping it for a while, it has a flavor like a molasses cookie. Very sweet with a baked cookie taste (molasses as I remember them). Produced by artofeliquids.com (site is "temporarily closed until further notice"; I hope I can get more. They might be wholesale only, I don't know.) I got it at a brick and mortar vape shop, 100 ml for $32. So yummy!
Former cigar and pipe smoker. Using Kayfun Prime clone with Eleaf iStick Pico 100W mod. Usually at about 10-12 watts.

Offline Darth Vaper

  • Administrator
  • Chief Waffler
  • *****
  • Posts: 7367
  • Gender: Male
Re: 2bacco Red vape juice. How can I clone it for DIY?
« Reply #5 on: April 07, 2021, 08:06:38 PM »
When I want sweet nothing beats Belgian Waffle... Mixes with tobacco vapes nicely too.

My usual vape is a mix of "555 Gold Flavor Concentrate by INA " with some "Oriental Tobacco Flavor Concentrate by FLV"

I get all of those concentrates from Wizard Labs as well. The last bunch of years it's been my only source for supplies. I just wish their flavor descriptions were better.

Offline caz

  • Vaping Angel
  • Administrator
  • Chief Waffler
  • *****
  • Posts: 19582
  • Gender: Female
  • Strawberry Queen
Re: 2bacco Red vape juice. How can I clone it for DIY?
« Reply #6 on: April 10, 2021, 01:07:47 AM »
its got caramel, honey, candy and tobacco flavours     https://vaperanger.com/products/red-by-2bacco-e-juice   dont know  if its available there.


You could try and create your own version using the above mentioned flavours.

Offline MaineVaper

  • Full Member
  • ***
  • Posts: 104
  • Gender: Male
  • I smell like vape. You do too.
Re: 2bacco Red vape juice. How can I clone it for DIY?
« Reply #7 on: April 10, 2021, 10:21:31 PM »
Awesome. That's the stuff. Thanks.
Former cigar and pipe smoker. Using Kayfun Prime clone with Eleaf iStick Pico 100W mod. Usually at about 10-12 watts.

Offline MaineVaper

  • Full Member
  • ***
  • Posts: 104
  • Gender: Male
  • I smell like vape. You do too.
Re: 2bacco Red vape juice. How can I clone it for DIY?
« Reply #8 on: April 10, 2021, 10:33:34 PM »
its got caramel, honey, candy and tobacco flavours     https://vaperanger.com/products/red-by-2bacco-e-juice   dont know  if its available there.


You could try and create your own version using the above mentioned flavours.
Only way to get it, other than at the B&M shops. Online stores are wholesale only now. No shipping to individuals.
Former cigar and pipe smoker. Using Kayfun Prime clone with Eleaf iStick Pico 100W mod. Usually at about 10-12 watts.

 


* Theme Select



Forum Default

Permanently