Kayfun Prime

[caz]

i am just curious how much different the clone and the original really are,  erm cy?   


That clone was only put up today,   i just happened to check out the new arrivals and it wasnt there yesterday. 

[CYBORG]

 Going sub with the Prime
This in my opinion defeats the point of a MTL tank but I tested out a sub coil for anyone interested (as you all know its not my thing).I used up a full tank for the test, it didn’t last long before empty.
It did keep up with the wicking.
No leaking with the liquid flow open by 720° (only my 2nd build but shows the first wasn’t a fluke, I have no idea of the PG / VG percentages but I used store bought liquid for the test and it wasn’t shown on the label.
Had to turn the power down & use the max airflow or the drip tip got way to hot.0.7Ω(OK not very sub but a lot lower than my normal) at 17w max airflowdid give a flavorful vape but beyond that things got to hot for me, was still on the warm side to say the least.Why anyone would want to run the Prime sub is beyond me but it works.To sum up yes it works sub but for me its time to pop a 1.8Ω coil back in it and use it as intended, or should I try an SS coil in TC with the SS tank section replacing the glass ?

Ohh decisions I hate decisions

[CYBORG]

clone out already  https://www.fasttech.com/products/1/10006473/9054200-kayfun-prime-styled-rta-rebuildable-tank-atomizer

Got to be worth a try at that price Caz, I will compare one with the original at some point.

[caz]

clone out already  https://www.fasttech.com/products/1/10006473/9054200-kayfun-prime-styled-rta-rebuildable-tank-atomizer

Got to be worth a try at that price Caz, I will compare one with the original at some point.

awesome,   really curious about the results   

[Darth Vaper]

I would hold off on a clone version until the reviews come in... this one is a little quick out of the gate so may not be worth messing with.

Taking that advise might save you 18$ towards the original.

[CYBORG]

 But I have one 

 
You do have a valid point Darth, a bad clone could easily put you off something that is so good.

 

[Ian]

Cy, I believe that SS tank section is one of only 4 'Moscow' engraved, so could be worth a few Bob!!!
The dude says that in the video that Caz linked, about 5.17 in....

[Darth Vaper]

Yours is the clone Cy? I thought you got the original.

[CYBORG]

Cy, I believe that SS tank section is one of only 4 'Moscow' engraved, so could be worth a few Bob!!!
The dude says that in the video that Caz linked, about 5.17 in....

 

[CYBORG]

 I got an original Darth that’s why I say if I get the FT clone I can do a comparison & let you know if it is up to par or it gets the hammer.

[Ian]

Be careful not too mix up the original and clone parts!!!

[Darth Vaper]

I got an original Darth that’s why I say if I get the FT clone I can do a comparison & let you know if it is up to par or it gets the hammer.

Yeah I read what you said but the way you said it works either way... LOL When you said "but I have one" made it seem yours was a clone.

The SXK V5 was a pretty good clone and works well.. this one though is origins unknown... not even built yet. 

I did manage to pick up a couple new toys this week and waiting on the slow boat.. 75w Evolv VTInbox squonker in silver/carbon fiber and MazeV2 RDA....Oumier Wasp Nano RDA ... a couple of 2$ Octopus style mini RDA's .. and some rebuildable coil heads for the MiOne

Think the Prime will be my Christmas present... hope they have a 5ml upgrade by then. 2ml is a con for me.

[CYBORG]

 I am pleasantly surprised by the 2ml capacity Darth & don’t think I will bother with the larger upgrade.
Got an SS / TC build in it now with the stainless tank section to see how I get on without seeing the quantity of liquid remaining.
Third build now and still no leaking so is this an improvement over the 5 or is that a fault with the SXK clone.

 Never had a squonker Darth but would like one that has TC or I know I would overdo it with the liquid.

[Darth Vaper]

I vape more then 2ml a day so the capacity is a issue for me... sure they will have something by the time I'm ready. I really have no need to see the liquid.. full metal tank is a plus for me .. don't have to worry when I drop it. Been vaping blind like that for many years... you know when the end is near just by taste.

The bit with the city etched in as a a little off putting. That sucker is gonna be sanded off day one. 

I have only ever had one squonker .... it was a mechanical one that could only use standard 510 atties.. I used cartomisers which just acted like a reservoir. Never really had to squeeze the bottle.. just holding the device at a more horizontal angle self fed the atomiser while inhaling. I like the look of a SS body with carbon fiber or wood trim... this one is anodized silver but as close to what I wanted that I could find. Really wish it was true stainless steel... I can keep SS looking like new forever.

[CYBORG]

 I use more than 2ml a day but it only takes seconds to fill, no tools required so it isn’t an issue for me.
Only a thought but will the bigger upgrade have an SS option or only glass, I know you like bomb proof.
The etching isn’t in your face, its pretty subtle. (wonder if Moscow really is rare )
I hate vaping blind because I don’t pay attention until its to late so hope this TC build works as it should, so far so good.

[Darth Vaper]

The extension will probably be offered in glass or SS.

I vape about 4ml a day so if it's 5ml I'm good to go. It somewhat eases the issue for vaping blind for me. Morning ritual with the coffee is a tank fill up and a fresh battery. When I used the Vivi Novas with the metal tank I would just go by taste.. you can taste it coming.... hardly ever had a dry hit issue but you have to be aware of it. They were a small tank but I did alright... I prefer fill it and forget it bomb proof vaping. 

Yeah I will just sand it off... don't care if it's rare.... never turns out that way. Don't need Moscow in my face every day.  Really don't care to have any city in my face when I vape really.. I don't like cities. 

[FahKingNut]

Lots of buzz going on here!!!  Love it!!!
 
Can't wait to hear about the comparison, but like Darth, no rush.

[CYBORG]

 No Rush is an understatement when dealing with FT 
The FT clone is pre order ETA 20 days so it could be months before they have it, I have a Kodi box in my basket but is stated ship in 3 days weeks ago an still says 3 days.
Don’t hold your breath Rik

[Darth Vaper]

By the time the FT no name clone is ready for delivery SXK will probably have a better one on the site.

I need to see 5ml before I'm willing to pull the trigger.

[caz]

whats SXK ?

[CYBORG]

 They make decent clones Caz, that’s who we got the V5 clones from 

[CYBORG]

I need to see 5ml before I'm willing to pull the trigger.

Only a glass tank with the extension so far Darth

http://shop.svoemesto.de/kayfun-prime-tank-extension.html

But its Borosilicate glass whatever the hell that is

[caz]

They make decent clones Caz, that’s who we got the V5 clones from

seems like a few are waiting for that particular clone  https://www.fasttech.com/forums/9054200/t/2536004/next-best-seller

[Darth Vaper]

LOL they are saying the same thing.. wait for the SXK version.

[CYBORG]

Had to look up Borosilicate glass
 It is a type of glass with silica and boron trioxide as the main glass-forming constituents. Borosilicate glasses are known for having very low coefficients of thermal expansion (~3 × 10−6 K−1 at 20 °C), making them resistant to thermal shock