The Vapers Den

Author Topic: Question about "Mycroft Milvertons Pipes"  (Read 3696 times)

Offline Bigjohn2016

  • Jr. Member
  • **
  • Posts: 21
Question about "Mycroft Milvertons Pipes"
« on: October 13, 2016, 03:33:33 PM »
He has two im very interested in, but i believe they are not VW/VV, they are set at a certain voltage or wattage im not entirely sure, but how do they vape? I was hoping to attach a Nature Vapes midi tank where i can switch out the wick when i need to as the liquids ill be vaping can be quite clunky, (House Of Liquids) NET juice. Cheers

Offline CYBORG

  • Mechanical Man
  • Chief Waffler
  • ********
  • Posts: 11994
  • Gender: Male
  • YOU WILL BE ASSIMILATED
Re: Question about "Mycroft Milvertons Pipes"
« Reply #1 on: October 13, 2016, 11:34:16 PM »
They are mechanical mods meaning they send the full voltage of the battery to the atomiser when the switch is operated, the power will drop as the battery depletes as with any mechanical mod.
It would be difficult if not impossible to fit a regulated board into a pipe and keep the size small enough to resemble a standard pipe.
YOU WILL BE ASSIMILATED

Offline caz

  • Vaping Angel
  • Administrator
  • Chief Waffler
  • *****
  • Posts: 19557
  • Gender: Female
  • Strawberry Queen

Offline caz

  • Vaping Angel
  • Administrator
  • Chief Waffler
  • *****
  • Posts: 19557
  • Gender: Female
  • Strawberry Queen

Offline Bigjohn2016

  • Jr. Member
  • **
  • Posts: 21
Re: Question about "Mycroft Milvertons Pipes"
« Reply #4 on: October 14, 2016, 03:25:01 AM »
They are mechanical mods meaning they send the full voltage of the battery to the atomiser when the switch is operated, the power will drop as the battery depletes as with any mechanical mod.
It would be difficult if not impossible to fit a regulated board into a pipe and keep the size small enough to resemble a standard pipe.

that don't sound bad to be honest,

Offline CYBORG

  • Mechanical Man
  • Chief Waffler
  • ********
  • Posts: 11994
  • Gender: Male
  • YOU WILL BE ASSIMILATED
YOU WILL BE ASSIMILATED

Offline Darth Vaper

  • Administrator
  • Chief Waffler
  • *****
  • Posts: 7340
  • Gender: Male
Re: Question about "Mycroft Milvertons Pipes"
« Reply #6 on: October 14, 2016, 10:13:37 AM »
You're still a little limited with the 18350 battery size though.

Offline vapingfool

  • Dr Ohm
  • Vaping Guru
  • *******
  • Posts: 5790
  • Gender: Male
  • Curmudgeon
Re: Question about "Mycroft Milvertons Pipes"
« Reply #7 on: October 15, 2016, 08:12:07 AM »
One option, if the bowl is deep enough, is to insert a Kick into the battery bore. You are limited to the 7 - 12 watt range, but these pipes are usually used with tanks designed for low wattage, so no big deal.  Unfortunately, most bowls are too shallow.
" style="border:0

I Vape and I Vote!

Offline Bigjohn2016

  • Jr. Member
  • **
  • Posts: 21
Re: Question about "Mycroft Milvertons Pipes"
« Reply #8 on: October 16, 2016, 05:10:02 PM »
One option, if the bowl is deep enough, is to insert a Kick into the battery bore. You are limited to the 7 - 12 watt range, but these pipes are usually used with tanks designed for low wattage, so no big deal.  Unfortunately, most bowls are too shallow.
Think im goin to go with milvos pipes chaps, very nice indeed, i like the way its made with the voltage etc, so i start off with a nice vape at full voltage, and the watts completely depend on the voltage? As the battery drains the vapor production goes down?

Offline Darth Vaper

  • Administrator
  • Chief Waffler
  • *****
  • Posts: 7340
  • Gender: Male
Re: Question about "Mycroft Milvertons Pipes"
« Reply #9 on: October 16, 2016, 07:17:11 PM »
Yes that is how it works out.

You need to set your atomiser up with a coil running the sort of ohms you require. That is your only option to get the vape you are after. And picking up a plastic battery case that can hold 4 18350 batteries helps too.

 


* Theme Select



Forum Default

Permanently